High Speed Flexo Printing And Slotting And Die Cutting Machine For Corrugated Box

  High Speed Flexo Printing And Slotting And Die Cutting Machine Linkage Line

Corrugated Box Printing Production Line

INTRODUCTION OF FLEXO PRINTING AND SLOTTING AND DIE CUTTING MACHINE

1. The mail motor is TECO Taiwan ,adopt frequency converters adjust,the frequency is “SEIMENS” brand,the PLC also adopt “SEIMENS” brand,the contactor adopt “SEIMENS” brand.the touch screen adopt SEIMENS brand.

FLEXO PRINTING AND SLOTTING AND DIE CUTTING MACHINE TECHNICAL PARAMETERS

LOCAL DETAILS

1. Cardboard feeding unit ( servo motor drive,one unit)   ⑴.Unit moving. ①.Each unit is electric moving left and right with warning bell. When unit moving, the bell will be warning to make sure the operator safe. The moving motor with constant torsional moment which can buffer the impact of the two units when the operation is wrong. ②.After all the units closed, each part is pneumatic locked. There is also lead locked cylinder which can make each part locked with bottom-track lock. If the cylinder is not locked, the main motor will not work.   ⑵.Lead edge feed system. ① With colorful touch screen show the produce quantity and can be input the production plan and also show the produce sheets number. Once the plan is finished, the counter system stops the feeding part and warns.all the phase of the unit and slotting size can store 999 orders in the touch screen,save adjust time and save corrugate board waste from phase adjust,full computer control system. ② No pressure type feeding table,corrugate board go inside machine without thickness and strength decrease.

2. The printing Unit.(Four units)   ⑴ The ceramic roller: (four units) ① The ceramic roller is steel pipe cover with ceramic,with laser cutting the ink hole. ② Ceramic roller customer can chose 400-800Dpi accord printing requirement. ③ The automatic Pneumatic control Up-down device of the ceramic roller is synchronous with the cardboard feeding system.(when the cardboard is fed,the ceramic roller is go down and touch the printing plate,when cardboard feeding is stop,the ceramic roller will go up and separated from the printing plate.)The ceramic roller also could be pneumatic controlled by manual button for up and down.   ⑵ Inking system ① Double direction ink pump to give ink to roller,stable ink and with improve printing quality. ② Cup to prevent the ink splashing. Steady inking and easy to maintain. ③ Have ink dust gauze,make the ink more clear,improve the printing effect. ④ With ink sensor in the machine,when ink level low,will warning and save the corrugate waste without ink printing.

3. The slotting unit. The slotting knife plate moving device ① The slotting knife plate roller is solid roller, material is 40CrMo, after two times grounded. Be polished and hard chromium plating. And after balance corrective. ② The width of the slot is 7mm. ③ The slotting knife is sawtooth, adopt alloy steel material and after heat treatment and grinded, more hardwearing and sharp-edged. ④ The cardboard cutting knife is adopted alloy material after heat treatment and grinded, more hardwearing, sharp-edged and high precise. ⑤ The slotting knife plate and line creasing wheel and pre creasing wheels are synchronous move left and right,adjust by electrically,control by button and colorful touch screen. ⑥ The four slotting knives are synchronous moving for adjust the high of the carton box, adjust by electrically, control by button and colorful touch screen. ⑦ The distance between the up and down slotting knife plate roller is adjusted by electric, with touch screen adjust and show the date, the adjusting scope is 2-12mm. The up and down slotting knife plate roller adopt the crosshead connect with the drive gears , when adjust the distance between the two rollers, the distance between the two driver gears of the two rollers will not change.

FAQ

Q1: Are you a manufacturer or a trading company?
A: We have our own factory in Tangshan, Hebei Province.

Q2. What is the machine warranty?
A: One year. After the warranty, we still provide technical support to buyer at low cost.

Q3. What is the production time while placing order?
A: Normally about 20-30 days.

Q4. What is the delivery time?
A: 35-50days after deposit.

Q5. Can your company handle shipping for customers?
A: Yes, just give us destination sea port or container yard.

Q6. Does the packing strong?
A: Yes. Adopts moisture-proof and shock-proof packaging which is suitable for long-distance road transportation and various types of weather conditions. A full set of maintenance and operation manuals is included.

Q7. How about the machine installation and training?
A: 1) We provide training in our factory for free; 2) We can send technicians (engineers) to your factory for installation and training. You shall pay round trip air fare and accommodations, plus each technician charges USD100/per day.

Q8. Do you have machines in stock?
A: For standard model, we have a large quantity in stock.For special model,we need 20-30 days to produce for you.

Q9. How can you assure the machines' quality?
A: Each machine will be test running at least 24 hours before delivery to assure the quality. And during the warranty, we will give spare parts for free if machine has any problem.

Q10. Do you inspect machines or test running before packing?
A: Of course we do. We have QC department to debug the machine before packing. If you want to use specific material to do the test running, you need to pay for the cost of the material

Q11. What's the payment term?
A: T/T 30% in advance, the balance shall be paid before delivery. Also accept payment by West Union or L/C at sight.

Q12. Do you accept factory visiting?
A: Warmly welcome for your visiting.

Q13. How many years are you in printing field?
A: JIGUO factory is more than 20years.